Tansel products are easy to install and ideal for DIY jobs. When or where the need is, a professional tradesman can do the job also.

Measuring Your Space

If you are planning to install baskets into existing cabinets, we can help you find the right solution. Start by measuring your internal WIDTH, DEPTH, and HEIGHT (mm).

Click on a link below for the cabinet that you are transforming:

Installation Guides

If you have a standard cabinet width (or using our 35mmW slides x 2), simply click here:

Installation Guide For Standard SLB Slides (PDF)

SCREWS: For a standard 16mm board, 15mmL chipboard/timber screws are suitable. Please note that we do not supply screws unless requested.

Installation Tips

Slides can be adapted to fit most custom built (non standard) cabinets.

Different specifications apply for baskets that accommodate extra deep cabinets (700mm+).

Please enquire directly on (02) 9440 9800 for any assistance in choosing the correct product for your storage requirements.

Storage Maximisation

To assist us with your inquiries, please advise internal (or external) cabinet dimensions so we can optimise your storage space. Measurements and information required are:

  1. internal width (wall to wall)
  2. internal depth (excluding door)
  3. internal height
  4. single door, double or no door

Additional packers and spacers are provided, these may vary from 4mm to 20mm.

Installation Notes

Unless we advise otherwise, the hook is positioned onto the lowest wire of the basket.

If you are using the 13mm slides, the black disconnect lever is accessible by fully extending the slide.

Product Care

All wire is chrome plated to give shine and low maintenance qualities. To clean, we recommend warm soapy water. Silvo and other stainless steel cleaning products can be used safely.

If your product is exposed to high wear and tear, the shine can be quickly restored by using a very fine sandpaper (available from hardware stores).